Viviendo a Pesar de la Crisis: Cambio de Pila a Transmisor de Presión Suunto Wireless Transmitter

Muy buenas,
Anteriormente hubo que mandarlo de vuelta a casa por la famosa campaña del riesgo de explosión:
https://www.suunto.com/Products/dive-computers-and-instruments/Suunto-wireless-tank-pressure-transmitter-led/

WIRELESS TANK PRESSURE TRANSMITTER:
The Suunto Wireless tank pressure transmitter gives you current tank pressure and remaining air time with just a glance at your wrist. Before your dive, simply pair the transmitter with your dive computer and you’re good to go. The transmitter’s handy green LED light lets you know that it’s on. Suunto Wireless Tank Pressure Transmitter is compatible with Suunto D9, DX, D9tx, D4i, D4i Novo, D6i, D6i Novo, Vytec, Vytec DS, Vyper Novo, Vyper Air, and HelO2.

PRODUCT HIGHLIGHTS:
-Compatible with Suunto air-integrated dive computers
-Green LED light to indicate data sending
-Battery life approx. 2 years (100 dives/year)

https://www.suunto.com/Support/recall/suunto-wireless-tank-pressure-transmitter-and-suunto-tank-pod-recall/

Home / Support / Suunto Wireless Tank Pressure Transmitter and Suunto Tank POD recall

PRODUCT RECALL: Suunto Wireless Tank Pressure Transmitter and Suunto Tank POD

Suunto announces a recall of all Suunto Wireless Tank Pressure Transmitters and Suunto Tank PODs

Suunto has identified a potential safety risk affecting all Suunto Wireless Tank Pressure Transmitters and Suunto Tank PODs which wirelessly transmit tank air pressure to compatible Suunto dive computers. In two reported incidents, the exterior case of a Suunto Wireless Tank Pressure Transmitter has failed during regular dry land pressure testing. Although extremely rare, this represents a potential risk of injury due to the risk of bursting.

Diver safety is of highest importance to Suunto. That is why Suunto has decided to initiate a recall of all Suunto Wireless Tank Pressure Transmitters and Suunto Tank PODs.

All consumers who have a Suunto Wireless Tank Pressure Transmitter or Tank POD are instructed to bring their products to an authorized Suunto dive dealer or a Suunto Authorized Service Center for inspection and upgrade. The process is free of charge for the consumers. All Transmitters and Tank PODs must not be used before the upgrade has been made.

Suunto sincerely apologizes for any inconvenience caused by this. As a complementary service, Suunto will provide a battery replacement free of charge and a one-year warranty from the date of inspection for all upgraded products.

Identification of affected products:

Suunto Wireless Tank Pressure Transmitter
-SS019098000 and SS005397000 SUUNTO WIRELESS TANK PRESSURE TRANSMITTER
-Suunto Wireless Tank Pressure Transmitter has a black cone-shaped plastic case – with SUUNTO, FINLAND printed on top of the case.
-The old model has a black plastic base. The new model has a transparent plastic based with an LED light.
-Size: diameter approximately 4 cm, length approximately 8 cm
-Compatible Products: Suunto D4i, D4i Novo, D6i, D6i Novo, D9, D9tx, DX, Vytec, Vytec DS, Vyper Novo, HelO2, Vyper Air.

Suunto Tank POD
-SS020306000 SUUNTO TANK POD
-Suunto Tank POD has black cone-shaped plastic case with SUUNTO TANK POD, MADE IN FINLAND printed in gray color on the case and a transparent plastic base.
-Size: diameter approximately 4 cm, length appoximately 8 cm
-Compatible products: Suunto EON Steel, Suunto EON Core and Suunto D5 dive computers.

What to do if you own a Suunto Wireless Tank Pressure Transmitter or a Suunto Tank POD

1) Do not use the affected product(s) before it has been upgraded.

2) Bring the product(s) to your nearest authorized Suunto dive dealer or a Suunto Authorized Service Center for inspection and upgrade. A list of dealers and authorized service centers can be found at: Dealer Locator . You can also use the free Suunto Online Service Request (only available for certain countries) to get your product(s) picked up from your home/office.

3) What will happen in the inspection and upgrade?
During the inspection, products will be opened and inspected. The battery as well as the o-rings for water sealing will be replaced. The plastic case of the product will also be replaced.

You will receive two additional safety parts; one of which must be added to your Transmitter or Tank POD depending on if connected through a high pressure hose or directly to the first stage. This is in order to minimize the amount of pressurized air inside the product.
Detailed safety instructions will be provided.

After the upgrade the products will be marked with small circle mark indicating the products are safe to use.

4) When you receive your upgraded product(s), please register the product(s) at www.suunto.com/register to ensure you receive a full one-year warranty extension from the date of inspection.

Find Q&A here.

We sincerely apologize for any inconvenience caused by this and thank you for your cooperation.

Aprovechando, le cambiaron la pila. Y veo que EXACTAMENTE a los dos años (tal y como viene en las instrucciones) se ha quedado sin pila. Fechas:

-Compra: 22/08/2016.
-Recall (y cambio de pila): 01/09/2017.
-Sin Pila: 03/10/2019.

Videos:

Ok, lo desmontamos de la grifería:

Y abrimos:

Venden kits:
https://www.simplyscuba.com/products/suunto-transmitter-battery-change

Pila para reemplazar: Lleva una Varta CR1/2AA pero sólo he podido conseguir una CR14250BL-AX.

Limpiar juntas y alojamientos, engrasar con grasa de silicona y volver a cerrar:

Hasta dentro de 2 años más!

P.D: Lo que hace el cacharrín:
https://viviendoapesardelacrisis.blogspot.com/2014/07/software-de-diario-y-planificador-de.html

Actualización a 23/10/2019: Mi hilo original (que tengo problemas para actualizar):
https://viviendoapesardelacrisis.blogspot.com/2014/11/cambio-de-pila-ordenadores-de-buceo.html

Actualización a 19/12/2020: Vaya:

https://www.suunto.com/es-es/Acerca-de-Suunto/declaraciones-de-conformidad-de-la-ue/

http://ns.suunto.com/Manuals/Wireless_Transmitter/DoC/DoC_suunto_wireless_tank_pressure_transmitter.pdf

Actualización a 19/07/2021: El viernes me empezó el ordenador a avisar de la pila del transmisor.

Actualización a 26/08/2021: Sigue con el aviso pero esta semana me ha llegado el kit.

Actualización a 05/09/2021: Ayer se le terminó la pila:

https://viviendoapesardelacrisis.blogspot.com/2014/07/software-de-diario-y-planificador-de.html

A ver si esta semana se la cambio.

Actualización a 12/09/2021: Ayer saqué un rato:

Actualización a 17/09/2021: Ayer traté de emparejarlos pero no hubo forma por mucho que hice el Clear. Me tengo que asegurar de que se me enciende cuando le doy presión al abrir la botella.

Actualización a 24/09/2021: Nada, que no hay forma. Sólo he visto la luz parpadeando al ponerle la pila vieja y darle presión.

Como ya he comprobado que la polaridad estaba bien, sólo me queda probar con otra pila nueva. Estará mal la que me mandaron con el kit?

Actualización a 27/09/2021: Esta mañana he comprado una pila como la anterior que usé y a ver cuándo la puedo probar:

Edit: EFECTIVAMENTE, la pila que me han mandado en el kit está mal y la que he comprado esta mañana (a la que, otra vez, le he tenido que quitar los terminales) funciona perfectamente: